Model RPS-4

CATV Remote Programmable Switch

Model RPS-4 CATV Remote Programmable Switch $1,470 Will ship in 4 weeks

Features

	Four panel toggle switches for manual operation
	Unused ports terminate in their characteristic impedance
	Four seperate wideband (DC to 1000 MHz) SPDT switches

Applications

Great for use with dual program switching

Specifications

	Wideband RF Switch Modules:
		Frequency range	DC to 100 MHz
		Impedance	75 Ohms
		Maximum signal	250 mW
		Insertiion Loss*	0.2 dB at 50 MHz
			0.6 dB at 500 MHz
			0.8 dB at 750 MHz
			1.0 dB at 1000 MHz
		Port to Port Isolation*	>75 at 50 MHz
			>60 dB at 500 MHz
			>55 dB at 750 MHz
			>46 dB at 1000 MHz
		Return Loss*	>22 at 50 MHz
			>19 dB at 500 MHz
			>17 dB at 750 MHz
			>14 dB at 1000 MHz
		*Note	Specifications are from Main-to-Common, Standby-to-Common Unswitched port terminates into 75 Ohms
	Other:
		Size (H x W x D)	1.75" x 19" x 11"
			(4.4 cm) x (48.3 cm) x (27.9 cm)
		AC Power	115/230 VAC, 60/50 Hz
		Operating Temperature	32°F to 122°F (0°C to 50°C)
		Connectors	Type F (standard) and 25 Pin "D" type
		Weight	6 lbs. (2.72 kgs)

Standard Accessories

	Power Line Cord
	Operator's Manual

RPS-4 Models

	Model Number	Description
	RPS-4	Four Module RF Switches with TTL interface

Additional Resources

		Model RPS-4 data sheet
		Large Picture
		Back To RF Switches

Specifications subject to change without notice.

Applied Instruments · 5230 Elmwood Avenue · Indianapolis · Indiana · 46203 (800) 244-2976 · (317) 782-4331 · (317) 786-9665 Fax

Copyright © 2006, Applied Instruments, Inc. All rights reserved.