[ Applied Instruments -- Products and Services ]

      [ MAP ]
      Model Blue Bunny NEW!
      Voltage Step-Up
      [ Blue Bunny ]
      Model Blue Bunny
      Voltage Step-Up
      $65
      Will ship in 15 business days

      What makes the Blue Bunny great?

      Now you can align WildBlue and Telesat/Anikast/Xplornet antennas without being connected to the modem! Get your dish pointed before you have to run your modem cables and do your provisioning. This allows you to power the TRIA with your Super Buddy™ or Sat Buddy™ meter.

      ***NOTE: The Blue Bunny Voltage Step Up is only compatible with WildBlue TRIAs manufactured by UMA in Taiwan. Please refer to the tag on the bottom of your TRIA to see if it’s compatible with the Blue Bunny Voltage Step Up. If it says “Made in Taiwan by UMA”, then it is compatible. If it says “Made in Korea by Ko Space”, then it is NOT compatible.***

      Ideal for Use with the Following Systems:

    • WildBlue
    • Telesat/Anikast/Xplornet

      • Features

    • Power the WildBlue and Anikast/Xplornet/Telesat TRIA with your satellite meter
    • Weather Resistant and Rugged durable aluminum case with rubber gaskets

      • Applications

    • WildBlue & Telesat/Anikast/Xplornet Installations
    • Site surveys
    • Commercial installations
    • Single family home installations
    • Multiple dwelling unit (apartment and condominium) system installations and alignments

      • Specifications

    • Enclosure
      		•  Aluminum with rubber gasket sealed end panels
    • Size (L x W x D)
      		•  2.8" x 2.8" x 1.3"
      (7.1 cm x 7.1 cm x 3.3 cm)
    • Weight
      		•  0.6 lbs. (0.27 kg)
    • Connector Style
      		•  F-female
    • Temperature Range
      		•  0° to 125° F (-18° to 52° C)
    • Input Voltage
      		•  from sat meter, 13 to 18 VDC
    • Input Current
      		•  600 mA maximum @ 13V
    • Output Voltage
      		•  Tx port 32 VDC, Rx port 26 VDC
    • Cable Length
      		•  Recommend short jumper, 100' max, RG-6
    • Output Current
      		•  150 mA max (combined both ports)
    • Passes RF Signals
      		•  950-2150 MHz, -60 to 0 dBm
    • Insertion Loss
      		•  0.4 dB (974 MHz), 1.1 dB (1563 MHz)
    • Return Loss
      		•  10 dB (typical)
    • Impedance
      		•  75 Ohm
    • Warranty
      		•  12 month limited
      *Specifications subject to change without notice
      Disclaimer: It is the responsibility of the user, prior to using the Blue Bunny, to verify compatibility of voltages and currents with the manufacturers of the specific satellite meters and LNBs. Applied Instruments, Inc. is not responsible for damage caused by misuse or non conforming meters and/or LNBs.

      ***NOTE: The Blue Bunny Voltage Step Up is only compatible with WildBlue TRIAs manufactured by UMA in Taiwan. Please refer to the tag on the bottom of your TRIA to see if it’s compatible with the Blue Bunny Voltage Step Up. If it says “Made in Taiwan by UMA”, then it is compatible. If it says “Made in Korea by Ko Space”, then it is NOT compatible.***

      Standard Accessories

    • Operation Instructions

      • Additional Resources
      Blue Bunny Data Sheet
      WildBlue Application Note for Use With Super Buddy™ Meter
      Large Picture
      Back To Signal Level Meter Products

      Specifications subject to change without notice.

       
      Applied Instruments · 5230 Elmwood Avenue · Indianapolis · Indiana · 46203
      (800) 244-2976 · (317) 782-4331 · (317) 786-9665 Fax
       
      Copyright © 2005, Applied Instruments, Inc. All rights reserved.