[ Applied Instruments -- Products and Services ]

      [ MAP ]
      Model HM5014-2
      Hameg 1 GHz Spectrum Analyzer w/Tracking Generator
      [ Model HM5014-2 Spectrum Analyzer ]
      Model HM5014-2
      Spectrum Analyzer w/ Tracking Generator
      $4,195
      Will ship in 4 weeks

      Features

    • Frequency range from 150 kHz to 1050 MHz
    • Amplitude range from -40 dBmV to +70 dBmV, 80 dB
    • Keypad entry for pricise and repeatable frequency setting
    • Tracking generator for determining amplitude-vs.-frequency characteristics on all types of CATV components
    • Keypad entry for pricise and repeatable frequency setting
    • Resolution bandwidth 9 kHz, 120 kHz, and 1 MHZ
    • Remote controllable via included RS232 interface

      • Applications

    • Bench sweep CATV components such as amplifiers, splitters, taps, traps...
    • Monitoring the bandwidth of your system for unwanted distortions

      • Specifications

      Frequency:
    • Frequency range
      		•  150 kHz - 1050 MHz
    • Display Resolution (Readout)
      		•  1 kHz (6.5 -Digit)
        Span
      		 Zero Span and 1 MHz to 1000 MHz in steps of 1-2-5
        Resolution Bandwidth, RBW (6dB)
      		 9 kHz, 120 kHz and 1 MHz
    • Video Bandwidth, VBW
      		•  4 kHz
       
      Amplitude:
    • Amplitude Range
      		•  -40 to +70 dBmV
      (-100 dBm to +10 dBm)
    • Scaling
      		•  10 dB/div., 5 dB/div.
    • Display Range
      		•  80 dB (@ 10 dB/div.), 40 dB (@ 5 dB/div.)
    • Harmonic Distortion
      		•  Better than -75 dBc (2nd at input level -27 dBm, ATTN 0 dB, frequency distance <3 MHz)
    • Input Attenuator Range
      		•  0 - 40 dB, 10dB steps
       
      Tracking Generator:
    • Output Frequency Range
      		•  150 kHZ to 1050 MHz
    • Output Level
      		•  +10 dBmV to +61 dBmV
      (-50 dBm to +1 dBm)
    • Frequency Response
      		•  ± 3 dB (61 dBmV to 50 dBmV) (+1 dBm to -10 dBm)
      ± 4 dB (50.2 dBmV to 10 dBmV) (-10.2 dBm to -50 dBm)
    • Spurious Outputs
      		•  Better than 20 dBc
       
      Inputs/Outputs
    • Signal input
      		•  N-Connector
    • Input impedance
      		•  50 Ω
    • Signal Output
      		•  N-Connector
    • Output impedance
      		•  50 Ω
    • Test Signal Output
      		•  N-Connector
       
      General
    • Operating Temperature
      		•  50°F to 104°F (10°C to 40°C)
    • Power Requirements
      		•  120/240 VAC, 60/50 Hz
    • Size (H x W x D)
      		•  4.9" x 11.24" x 15.0"
      (12.5cm) x (28.5cm) x (38.0cm)
    • Weight
      		•  14.28 lbs. (6.5 kg)

      Standard Accessories

    • (2) 30" 75 Ohm BNC male patch cords
    • (2) N to BNC Adapters
    • 50 Ohm to 75 Ohm matching pad
    • PC Software on CDR
    • Power Line Cord
    • Operator's Manual

      • Optional Accessories

    • Padded cordura carrying case
    • Model FP-1, battery to AC power pack, 50 Watt maximum output, 1.2 hours service per charge, 9.5 lbs. (4.31 kg), mounts to bottom of spectrum analyzer

      • Additional Resources
      Model Hameg 5014-2 Data Sheet
      Large Picture
      Hameg HM5014-2 Operation Manual
      Back To Spectrum Analyzer Products

      Specifications subject to change without notice.

       
      Applied Instruments · 5230 Elmwood Avenue · Indianapolis · Indiana · 46203
      (800) 244-2976 · (317) 782-4331 · (317) 786-9665 Fax
       
      Copyright © 2005, Applied Instruments, Inc. All rights reserved.